adygil Adygil Fishing No Roll Sinker Mold Kits 1oz 1.5oz 2oz 3oz 4 Cavities, silver, standard : Sports & Outdoors

14 to 16 ga Galv wire or Copper Wire When you're angling in heady waters, the Claw Sinker hangs on like a grappling hookeven under very swift

Do It Mold Claw Sinker or Surf Weight Size 2, 3, 4 oz Do it Mold (3275) CLAW-3-234 Cavities 3 Total

Do-It No Roll Sinker (3 - 5 oz) 3385 : Fishing Sinkers : Sports & Outdoors

Dimatteo Round Sinker Mold with 8 Cavities and 1/3-Ounce,Without Handle : Home & Kitchen

The flat low profile does not drift with the current so your line stays in place. A CP332 Core Pin for each cavity is included. Core pins can be stripped away immediately in the mould or later after the extracted parts have cooled. Extra CP332 parts are available to increase moulding speed.

Do-it No-Roll Sinker Mold

Round Sinker Mold With 5 Cavities and 3.5-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould.

Adygil Round Sinker Mold with 5 Cavities and 3.5-Ounce,without Handle

adygil Adygil Fishing No Roll Sinker Mold Kits 1oz 1.5oz 2oz 3oz 4 Cavities silver standard : : Sports & Outdoors

How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into

Dimatteo Fishing Egg Sinker Mold Kits 1oz 2oz 3oz 4oz 5oz 5 Cavities

Do-It Bank Sinker Mold with 4 Cavities and 2, 3, 4, and 5-Ounce : : Sports & Outdoors

The flat, low profile does not drift with the current, so your line stays in place. A CP332 Core Pin for each cavity is included. Core pins can be

Do-It No Roll Sinker (3 - 5 oz) 3385