Shackle Mount

This package consists of the following: (1) Shackle Mount for a 2 reciever! We can custom fit the shackle to any shackle size!

Tension Shackle Hanger For 73-87 GM 1/2 ton and 3/4 ton pickup and

Size: Weld on clevis mount measures 29/32 hole, fits for 3/4 shackle. Picture 2 has more sizes for reference. Installation: Clevis Mount Bracket can

Clevis Mounts Bolt On 3/4'' Shackle D-Ring Shackle Mount

Shackle Mount NSN 2510007409514 M809 Series 5 Ton and M939 A1/A2 Series 5 Ton

2.000 wide X 2.300 tall X .750 thick w/.905 diameter bored hole (true round) & 3/8-16 tapped holes (minimum .650 thread depth) for 3/4 shackle.

Bolt On, D-Ring Shackle Mount, 750 Thick, 905 Dia for 3/4 Shackle - 7/8 Pin, with Backer Plate for Mounting Strength. for Bumper, Tractor Bucket

DIY FAB universal weld on shackle mounts for use with 3/4 bow shackles. Our shackle mounts feature a smooth machined finish bore and profile. Need a

1 thick HD Weld on shackle mount for use with 3/4 bow shackles - D-ring

The Rust Buster Rear Shackle Mounts help to replace the link between your leaf springs and rear frame on your 95-04 Tacoma truck. The EZ Slip design allows the repair section to slide onto the frame and will include all the factory needed holes and mounting locations. Our repair sections will help to keep your Jeep on the road for years to come.

Kentrol RB7101 Rear Shackle Mount

For tough jobs and off-road vehicle recovery applications, the CURT D-ring shackle mount is a hardworking extension of your truck. It features a solid steel shank for maximum strength and has a weight capacity rating of 13,000 lbs. straight-line pull (limited to lowest-rated towing component). This makes it the perfect accessory for difficult vehicle recovery and other straight-pull towing applications. The shank also measures 2in.

Curt 45832 2 D-Ring Shackle Mount

Finally a hitch receiver shackle mount designed for Class V receivers. Only available in Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish. The HitchLink 2.5 will accept both 3/4 and 7/8 inch shackles. It can be oriented inside the hitch receiver allowing the shackle tab to be parallel to the bumper or vertical depending on its desired need. Rated at 18,000 lbs. Ultimate Failure at 69,000 lbs.

Factor 55 Hitchlink 2.5 Reciever Shackle Mount 2.5 inch Receivers Anodized Gray (00022-06) 00022-06

Shackle Hangers R1253